Why does my Platinum XBM1029S Bread Maker bread have hollow middle parts?
If the middle parts are hollow after cutting the bread from your Platinum Bread Maker, it may be caused by excessive water or yeast, or a lack of salt. Reduce the amount of water or yeast appropriately and check the salt content. It can also be due to the water temperature being too high, so check the water temperature as well.
Why does my Platinum XBM1029S bread have dry powder on the surface?
If the bread surface is adhered to dry powder when using your Platinum Bread Maker, it may be because there are strong glutinosity ingredients in the bread, such as butter or bananas. Avoid adding these types of ingredients. It can also be due to inadequate stirring caused by a lack of water. Check the water level and the mechanical condition of the bread maker.
Why is it so hard to remove the bread from my Platinum Bread Maker?
If it's very difficult to take the bread out of your Platinum Bread Maker, it's likely because the kneader has adhered tightly to the shaft in the bread pan. After removing the bread, put hot water into the bread pan and immerse the kneader for 10 minutes. Then, take it out and clean it.
General| Brand | Platinum |
|---|---|
| Model | XBM1029S |
| Category | Bread Maker |
| Language | English |
Indicates high internal temperature, requiring the machine to cool down.
Indicates a disconnected temperature sensor, requiring service from an authorized agent.
Guidance on making quick breads, including ingredient placement and mixing tips.
Details on ultra-fast baking settings and the critical role of water temperature.
Proper method for measuring liquid ingredients using measuring cups.
Correct technique for measuring dry ingredients to ensure accuracy.
The recommended order for adding ingredients for optimal bread making.
To Next Page
