DISTILLED WATER / REGULAR WATER
Although this product has been designed to work
well with tap water, the product will need higher
maintenance due to algae and the water becoming
cloudy. The water will need changing approximately
once every few months. By using distilled water, the
water and product will stay clean for longer.
Inspect the Bubble Tube to make sure that there are no cracks
or damage. Take extreme caution when handling, as the Bubble
Tube is a fragile product.
Inspect the base to check that the wires
in the base appear to be connected.
Take the three screws off the back panel of the silver base. Store the
three screws safely. Be careful with the exposed hole, as the stainless
steel can have sharp edges.
Slide the tube into base. The part with the pump and controller is
the bottom and the side with the silver cap is the top. When placing
the tube into the base, face the opening at the bottom towards the
open panel at the back, to have easy access for the next steps.
Feed the adapter through the corner hole
of the base (not the panel you unscrewed).
Plug the adapter into the power
port on controller box.
Place the Bubble Tube in the location you will want it to stand,
as it will be too heavy to move later.
WATER
the simple
joys in life
BRING A FRIEND ALONG
We recommend setting up with two people
INSTRUCTIONS
1
2
3
4
7
6
5
know
know
OUR COMMITMENT TO YOU
Here at Playlearn, we have spent many years developing our Bubble Walls and Bubble
Tubes to ensure they are simple to set up and trouble-free, so you can spend more time
enjoying it and less time setting it up. We want you to love your Bubble Tube, so please
let us know if any questions come up. Please email us at support@playlearn.com and we
will get back to you within 48 hours. The Bubble Tube is a delicate product and must
be looked after and maintained to get optimal use. Any time maintenance is required
(and certainly for emptying the water!), we recommend that two people do this together.
To Next Page
Loading...