Installation Instructions
Models XX0193 and XX0193S
ECN2716
Page 5 of 14
Concrete Base
Anchor Bolts
Supplied By
Customer
Protective
Surfacing Level
Coil Spring
2" in. (51 mm)
Coil Spring Surface Mount Footing Detail
FOOTING NOTES
• All support posts and component support legs may have either a factory-applied sticker
with line, or factory-applied mark designating protective surfacing level on a clear and
level installation site.
• If play structure is installed on uneven terrain, maintain support post mark at protective
surfacing level at lowest grade. Adjust other footings accordingly. Support posts and
all attaching decks and play components must be plumb and level.
• Footing size may vary due to local soil and weather conditions.
• Base of footing must be below frost line.
• Comparison of protective surfacing materials is available in Handbook for Public
Playground Safety published by U. S. Consumer Product Safety Commission.
Surface mount hardware is not supplied. Customer is responsible for
concrete base and providing surface mount hardware as specifi ed by a
registered structural engineer for each specifi c project application.
To Next Page
Loading...