EasyManua.ls Logo

pleasant hearth VFL2-VO30DR User Manual

pleasant hearth VFL2-VO30DR
10 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
1
VENT-FREE
GAS LOG SET
MODEL # VFL2-VO24DR
VFL2-RO24DR
VFL2-VO30DR
VFL2-RO30DR
VFL2-MO24DR
VFL2-MO30DR
INSTALLER: Leave this manual with the appliance.
CONSUMER: Retain this manual for future reference.
WARNING: IF THE INFORMATION IN THIS MANUAL IS NOT FOLLOWED
EXACTLY, A FIRE OR EXPLOSION MAY RESULT CAUSING PROPERTY
DAMAGE, PERSONAL INJURY OR LOSS OF LIFE.
The Installation instructions for an appliance for installation on combustible ooring
shall specify that when the appliance is installed directly on carpeting, tile or other
combustible material, other than wood ooring, the appliance shall be installed on a
metal or wood panel extending the full width and depth of the appliance.
WARNING: This appliance
is equipped for (Natural and
Propane) gas. Field conversion
is not permitted other than
between natural or propane
gases.
- Do not store or use gasoline or other ammable vapors and Iiquids in vicinity of
this or any other appliance.
WHAT TO DO IF YOU SMELL GAS
Do not try to light any appliance.
Do not touch any electrical switch; do not use any phone in your building.
Immediately call your gas supplier from a neighbors phone. Follow the gas
suppliers instructions.
If you cannot reach your gas supplier, call the re department.
- Installation and service must be performed by a qualied installer, service agency
or the gas supplier.
This is an unvented gas-red heater. It uses air (oxygen) from the room in which it is
installed. Provisions for adequate combustion and ventilation air must be provided.
Refer to Air For Combustion and Ventilation section on page 8 of this manual.
This appliance may be installed in an aftermarket, permanently located manufactured (mobile)
home, where not prohibited by local codes. This appliance is only for use with propane or
natural gas. This appliance is equipped with a simple means to switch between propane and
natural gas. Field conversion by any other means including the use of a kit is not permitted.
Dual Fuel
80-10-443 - 2018-06-01
CAUTION - FOR YOUR SAFETY
ANS Z21.11.2 2013
Questions, problems, missing parts? Before returning to your retailer, call our customer
service department at 1-877-447-4768, 8:30 a.m. – 4:30 p.m., CST, Monday – Friday or
email us at customerservice@ghpgroupinc.com.
NG LP
C US
C US
Patent Pending Dual
Fuel System
Question and Answer IconNeed help?

Do you have a question about the pleasant hearth VFL2-VO30DR and is the answer not in the manual?

pleasant hearth VFL2-VO30DR Specifications

General IconGeneral
Brandpleasant hearth
ModelVFL2-VO30DR
CategoryGas Heater
LanguageEnglish

Summary

Safety and Cautions

General Safety Warnings

Crucial safety information regarding gas leaks, flammability, and proper handling of the appliance.

What to Do If You Smell Gas

Procedure to follow if gas is detected, emphasizing safety and calling gas suppliers or the fire department.

Battery Instructions

Battery Installation and Maintenance

Guidelines for inserting, replacing, and maintaining batteries for optimal performance and safety of the remote system.

Lighting and Shutdown Procedures

Pilot Lighting Procedure

Step-by-step guide to ignite the pilot light using the electronic ignitor and control knob, with troubleshooting tips.

Appliance Shutdown Procedure

Instructions on how to safely turn off the gas supply to the appliance via thermostat or control knob.

Remote Control System Overview

Introduction and Transmitter Basics

Overview of the multi-function wireless remote control system and basic transmitter functions.

Remote Control Display and Modes

LCD Display Elements and Unit Settings

Description of the LCD screen elements, temperature units, and manual operation.

Thermostat Operation

Instructions for setting the desired room temperature and operating the system in thermostat mode.

Remote Control Advanced Functions

Temperature Adjustment and Operational Notes

How to change set temperature, disengage thermo mode, and notes on operational settings.

Remote Receiver Placement

Guidelines for positioning the remote receiver, avoiding high temperatures for optimal performance.

Remote Receiver Installation

Receiver Functions and Switches

Explanation of slide switch positions (ON, OFF, REMOTE) and transmitter response.

Mounting and Wiring Procedures

Instructions for mounting the receiver, wiring to the gas valve, and connecting wires correctly.

Remote System Management

Communication Safety and Lock-Out Feature

Details on safety features like transmitter signal loss detection and childproof lock-out.

Transmitter and Receiver Pairing

Instructions for pairing the transmitter with the receiver to establish communication and security codes.

Transmitter Accessories and Troubleshooting

Wall Clip Installation and Battery Life

Instructions for mounting the transmitter and information on battery lifespan and checks.

Remote System Troubleshooting

Guidance on resolving common issues like battery problems, range limitations, and clearing memory.

Remote System Specifications

Information on battery types, operating frequency, and FCC/IC identification numbers.

Burner and Pilot Inspection

Pilot Flame Pattern Analysis

How to identify correct and incorrect pilot flame patterns and potential shutdown causes.

Related product manuals