Plejd CTR-01 User Manual

Further information can be found
in the Plejd app or at plejd.com
CTR-01
INSTALLATION MANUAL
0089.2.11
Mains electricity
230 V/50 Hz
Standby power
<0.5 W
External operating temperature
-20 to +35 °C
Dimensions
46x46x18 mm
Type of switching
Relay, Micro gap (μ)
Protection
Overtemperature software
Zero crossing switching (breaker protection)
Radio
2.4 GHz mesh
Bluetooth
®
Radio range
Up to 10 m indoors.
The Plejd mesh technology extends the range by
allowing the units to communicate with each other.
Compliant to standards
Hereby, Plejd AB declares that the radio
equipment type CTR-01 is in compliance with
Directive 2014/53/EU.
The full text of the EU declaration of conformity
is available at the following internet address:
plejd.com
Plejd AB
Krokslätts fabriker 27A
431 37 Mölndal
Sweden
Manufacturer | Plejd AB
Country of manufacture | Sweden
RISK OF INJURY TO PERSON OR PROPERTY
All work on the appliance must be
carried out by an authorized electrician.
National laws and regulations
must be followed.
EN

Plejd CTR-01 Specifications

General

Brand	Plejd
Model	CTR-01
Category	Dimmer
Language	English

Summary

Safety and Compliance Information

Risk of Injury to Person or Property

Warning about requiring authorized electricians and adherence to national laws for appliance work.

Compliance Standards

Declaration of conformity for CTR-01 with Directive 2014/53/EU, with internet address for full text.

Product Connection and Setup

Connect the Product

Instructions for installing the product and recommended load types for maximum service life.

Control Inputs

Explanation of how control inputs 1 and 2 can be used for wired and wireless control.

App Integration and Handover

Download App and Follow Instructions

Guidance on downloading the Plejd app, connecting via Bluetooth, and configuring settings.

Hand Over the Plejd System

Instructions for providing the system code sticker and welcome folder to the customer.

Support Contact

Contact information for Plejd customer service for technical questions via email or phone.