Plejd DIM-01 User Manual

DIM-01
0082.3.1
Compliant to standards
Hereby, Plejd AB declares that the radio
equipment type DIM-01 is in compliance
with Directive 2014/53/EU.
The full text of the EU declaration of
conformity is available at the following
internet address: plejd.com/compliance
Mains electricity
230 V/50 Hz
Standby power
0.3 W
External operating temperature
-20 to +35 °C
Dimensions
46x46x18 mm
Load type
Trailing edge
Leading edge
Protection
Overtemperature software
Overtemperature hardware
Overload software
Radio
2.4 GHz mesh
Bluetooth
®
<10 dBm
Radio range
Approx. 10 m indoors
The Plejd mesh technology extends the range by
allowing the units to communicate with each other.
EN
INSTALLATION MANUAL
Further information can be found
in the Plejd app or at plejd.com
RISK OF INJURY TO PERSON OR PROPERTY
All work on the appliance must be
carried out by an authorized electrician.
National laws and regulations
must be followed.
Plejd AB
Krokslätts Fabriker 27A
431 37 Mölndal, Sweden

Plejd DIM-01 Specifications

General

Frequency	50/60Hz
Trailing edge	Yes
Dimming Range	1-100%
Color	White
Control	Wireless
Voltage	220-240V
Wireless Protocol	Bluetooth
Compatibility	LED, Halogen

Summary

Safety Warnings

Risk of Injury

All work on the appliance must be carried out by an authorized electrician. National laws and regulations must be followed.

Product Connection

Connect the product

Install the product in the appliance box behind the push button/box lid or secure it with a mounting clip.

Load Compatibility

DIM-01 is a universal dimmer for loads up to 300 VA, supporting various load types like LED and halogen.

App Configuration

Follow App Instructions

Download the Plejd app to complete installation setup, requiring Bluetooth and an internet connection.

System Handover and Support

Hand over the Plejd system

Provide the system code to the customer by writing it on the included sticker and placing it in the distribution box.

Customer Support

Contact customer service via email or phone for any technical questions regarding the product.