Plexgear Soundsaver freestyle - Use; Buttons; Getting Started; Manual Recording Mode

3
ENGLISH
Audio bitrate: 128 Kbps
Dimensions: 113x82x32 mm
Weight: 186 g (without batteries)
Start
1.
Insert 2x AA batteries or connect the device with the supplied USB cable.
2. Press the button on the side (1) to open the hatch and insert a cassette.
3. Connect headphones or a speaker via the AUX connection
(2) to be able to hear what is being played.
4. Insert a Micro SD card into the slot (3), a green light should turn on.
5. Press the play button (6) to start listening to the
cassette. Press it again to pause the tape.
6. Press the record button (8) while the tape is playing to make the
device start converting the tape digitally to MP3 and saving it
on the Micro SD card. Press it again to stop the process.
7. Adjust the listening volume to your liking by
turning the volume wheel on the side.
Recording modes
Manual mode
Start playing the tape and press the record button, the LED indicator should go from a
solid green to a quickly ashing green. Press the recording button once more to stop
recording. If the indicator doesn't start ashing eject the Micro SD card, reinsert it and
try again.
When recording in manual mode the cassette player will save the recording as one
Use
Record Rewind ForwardPlay/pause
Buttons