PLEXLOG PL40 - Introduction; Scope of Delivery; Device and Connections

1
Introduction
These brief instructions are intended for skilled personnel with appropriate qualifications
and experience in handling low-voltage devices.
This Quick Start Guide does not replace the PLEXLOG PL series manual. The PLEXLOG PL
series manual can be found at qr.plexlog.com.
Scope of delivery
- PL data logger (PL40, PL100 or PL500+)
- Quick guide
- Plan device connection assignment inverter
- Sticker with ID and password
- Power supply unit
- 2 pieces connector plug 12-pin green
- 2 pcs screws + dowels
Device and connections
Figure 1