Plott Cubit - Device Operation; Main Button Functions; Mark Button Functions

Short Press Main Button
to Power On.
Long Press Main Button
for 1-3s and release
to Clear the Measure
Result.
Long Press Main Button
for over 3s to Power
Down.
Short press Main Button
to switch the reference.
In GUIDE Mode
supports UP and DOWN
2references.
In Non-GUIDE Mode
supports UP and DOWN
and BACK 3references
In Non-GUIDE Mode
Short press Mark Butto to Turn On the laser and do single
measurement.
Long press Mark Button to Enter/ Exit the continuous
measurement.
In GUIDE Mode
Press Mark Button to switch to next Guide Point.