PLS PLS2 Palm Laser User Manual

•
ON/OFF MENU
SWITCH
•
BATTERY DOOR
•
1/4 X 20 ACCESSORY
IN BASE OF EACH UNIT
•
USE EITHER
3 AA 1.5V
ALKALINE OR
NICAD
BATTERIES
•
OPTIC WINDOW
•
MAGNETIC
WALL BRACKET
•
POUCH
•
PLS LD LASER
DETECTOR
PLS2 and PALM LASER are registered
trademarks of PLS
•
PACIFIC LASER SYSTEMS
PLS2 utilizes Patented Technology US Patent 6763595
O
PERATING
M
ANUAL
FEATURES
MENU SWITCH
SAFETY LABELING
PRESS “ON” TO SCROLL THROUGH THE MENU.
THE NUMBERS INDICATE MENU FUNCTIONS:
1. LEVEL/HORIZONTAL
BEAM / GREEN LED
2. PLUMB/VERTICAL
BEAM / GREEN LED
•UNLESS THE PLS2 IS ON NUMBER 4 MODE, UNIT WILL
NOT OPERATE IF TILT EXCEEDS 6
O
OUT OF LEVEL.
• AMBER LED = LOW BATTERY
CAUTION: USE OF CONTROLS, ADJUST-
MENTS OR PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN MAY RESULT
IN HAZARDOUS RADIATION EXPOSURE.
PLS2 complies with US FDA
standards, 21 CFR, 1040.10 and 11.
These labels are attached to
every PLS laser. These are
not to be removed or defaced.
PLS • 2550 KERNER BLVD, SAN RAFAEL, CA 94901
WWW.PLSLASER.COM
AVOID EXPOSURE
LASER RADIATION
EMITTED FROM
THIS APERTURE
PLS2 Palm Laser
ON/OFF BUTTON
LED
800-601-4500
S/N:
PLS2 COMPLIES WITH FDA STDS 21
CFR, 1040.10 AND 11 EXCEPT FOR
DEVIATIONS PURSUANT TO LASER
NOTICE 50 DATED 7/26/01
CAUTION
LASER RADIATION
DO NOT STARE INTO BEAM OR VIEW
DIRECTLY WITH OPTICAL INSTRUMENTS
MAX OUTPUT POWER <1mW
WAVELENGTH 635-670nm
CLASS II LASER PRODUCT
WARNING LABEL
BACK
FRONT
APERTURE
LABEL
ID# CERTIFICATION LABEL
®
PACIFIC LASER
SYSTEMS
The Professional Standard
3. BOTH BEAMS - SELF-
LEVELING/ GREEN LED
4. BOTH BEAMS - FIXED/RED LED
5. OFF

PLS PLS2 Palm Laser Specifications

General

Laser Class	Class II
Self-Leveling	Yes
IP Rating	IP54
Laser Wavelength	635 nm
Power Source	Battery
Weight	0.3 kg
Operating Temperature	-10°C to 40°C
Laser Type	Red Beam

Summary

Features and Operation

Menu Switch Functions

Describes the ON/OFF switch, menu scrolling, and LED indicators for operation modes.

Safety Labeling and Warnings

Details laser radiation precautions, compliance information, and warning labels.

Operational Checks

Level Accuracy Check

Procedure to verify the laser's leveling accuracy using targets and measurements.

Plumb Calibration Check

Procedure to verify the laser's plumb accuracy by checking beam alignment.

Warranty and Specifications

Product Warranty

Explains the warranty period, terms, exclusions, and customer responsibilities.

Technical Specifications

Lists key performance attributes like light source, range, accuracy, power, and dimensions.