MAINTENANCE AND SAFETY
Detector Cleaning:
Donotwipeordustdirtoffthedetector
reception window o r display windows with a dry or other
abrasive material as scratching could occur, reducing visibili-
ty through these windows. A soft cloth and mild soap and
water are effective. The unit may NOT be submerged under
water or sprayed with a low pressure hose. PLS SLD is not
water proof and warranty does not cover water damage. Do
not use any other fluids other than water as they may attack
polymer components.
Transportation:
Use the original carton or your PLS laser
instrument case to transport the detector.
Storage:
If the detector will not be used for a month or
more, it i s recommended to remove the battery.
Batteries:
It is recommended to use only high quality alka-
line batteries.
Intended Uses of Detector: The PLS SLD laser detector is
designed and suitable only for detecting a laser beam from
PLS pulsed lasers.
Prohibited Uses:
- Operation without instructions.
- Operation other than the intended uses.
- Opening the detector, except the battery compartment.
- Modification or conversion of the detector.
Precautions:
- The person in charge of the detector must understand the
instructions in this manual and ensure other users do also.
- Periodically carry out test measurements, particularly after
the detector has been subjected to abnormal use and before
and after important measurements.
To Next Page
Loading...