2;='*&1%(9$$,&
Your plum will automatically notify you when your argon is running low, and when it needs
replacing. Your argon canister is fully reusable, and you can order replacement canisters directly
from Plum or through authorized resellers. To replace the canister, power off your Plum by
removing the power cord, and then remove the screw from the argon door on the rear of your
plum. Unscrew the argon canister counter clockwise, and screw the new canister in until its
secure. Power your Plum back on, and touch the Settings button and ARGON button to verify
the argon canister is now displaying as full.
5"C+';@&1%,%+&
If you want to return your Plum to the original factory settings, touch the Settings button, then
touch GENERAL button, and then touch ABOUT button. Select the FACTORY RESET
button and then confirm to restore your Plum.
!;"*,8';+9*=&/$H?&
We recommend that you do not move your Plum frequently, but if you need to move your Plum,
it’s best to do so in its original packaging. When carrying Plum, hold it by the sides on the black
plastic base.
To Next Page
Loading...
Need help?
General