Seite 11 von 11
3.3. Connection the USB keyboard and mouse (optional)
To ease patient data entry on the “plusoptiX A12”, you can use a stylus (i.e Touchpen e.g.
Stylus). Alternatively, you can connect a USB mouse or a USB keyboard. Connect your input
device to the USB interface of the device. As an alternative to wired input devices, you can
also connect wireless input devices.
A USB keyboard is necessary for:
- inputting and selection of patient data
- entering the password in the WLAN settings
- configuring network settings to connect to the practice network
If a connected mouse or keyboard is not working, please check whether the USB keyboard
or mouse is switched on, connected with the “plusoptiX A16” and whether the batteries are
inserted. If your input device still doesn’t work, this means it is not supported by the drivers
installed in the “plusoptiX A16”. Use input devices from another manufacturer instead in this
case.
Note:
Non-functioning external input devices do not constitute a service or warranty
case!
To Previous Page
Loading...
