13
Scan within Newsoft Presto! BizCard:
1. Click the Windows Start button to launch Presto! BizCard. (For Windows 8.1
users: Point your mouse cursor to the upper or lower right corner of your screen
to open the Charm bar. Click on the Start charm, then click on the downwards
arrow button in the lower left corner of the screen. The Apps screen will be
shown. Move your cursor to the right edge of the screen to scroll right until you
find Presto! BizCard, and then click on Presto! BizCard.)
Attention
If you have more than one scanner or other
imaging devices installed on your computer, you
need to set this scanner as the default scanning
source before you acquire the TWAIN program.
1. From the File menu, click Select Scanner.
2. In the window that opens, choose this
scanner and then click the OK button to set
this scanner as the default scanning source.
2. Within Presto! BizCard, click File > Scan with TWAIN user interface.
3. In the TWAIN window that opens, select Sheet Feeder as the Scan Type.
4. Adjust the scanning settings (Paper Size: Automatic Size, Resolution: 300).
To Next Page
Loading...
