PMA Digital 280-1 - Page 29

name value range description default
IAdA
blocked selfoptimization (only visible with BlueControl!)
0
0
free
1
blocked
IExo
extended operation level blocked (only visible with BlueControl!)
0
0
free
1
blocked
ILat
suppression error memory
0
free
1
blocked
Pass
OFF...99999
password -19999 ...99999
OFF
IPar
parameterlevel blocked (only visible with BlueControl!)
1
0
free
1
blocked
ICnf
configurationlevel blocked (only visible with BlueControl!)
1
0
free
1
blocked
ICal
calibrationlevel blocked (only visible with BlueControl!)
1
0
free
1
blocked
g
Resetting the controller configuration to factory setting (Default)
r chapter 11.1 (page 47)
+
BlueControl - the engineering tool for the BluePort controller series
Three engineering tools with different functionality facilitating Dig 280-1 confi-
guration and parameter setting are available (see chapter 8 : Accessory equipment
with ordering information).
In addition to configuration and parameter setting, the engineering tools are used
for data acquisition and offer long-term storage and print functions. The enginee
-
ring tools are connected to Dig 280-1 via the front-panel interface "BluePort

"by
means of PC (Windows 95 / 98 / NT) and a PC adaptor.
Description BlueControl: see chapter 8: BlueControl (page 40)
Configuration level
Digital 280-1 Configuration 29