PMC MB1 - User Manual

MB1/P
T R A N S M I S S I O N L I N E
M O N I T O R L O U D S P E A K E R S
Introduction
...............................................................................................................................................
2
Unpacking
...............................................................................................................................................
2
Connection
...............................................................................................................................................
3
The Neutrik Speakon
...............................................................................................................................................
4
Loudspeaker Placement
...............................................................................................................................................
5

Summary

Introduction to PMC MB1;P Loudspeakers

Unpacking PMC MB1;P Monitors

Details on how to unpack the MB1 monitors and included accessories.

Connecting the PMC MB1;P Loudspeakers

Standard Two-Wire Connection

How to connect the loudspeaker using standard two-wire Speakon cables.

Bi-Wire Connection for MB1;P

Instructions for connecting the loudspeaker using bi-wire Speakon cables.

Tri-Wire Connection Guide

Guidance on connecting the loudspeaker using tri-wire Speakon cables.

Understanding the Neutrik Speakon Connector

Explanation of the Neutrik Speakon connector and its benefits for high current loads.

Optimizing Loudspeaker Placement

Running In New PMC Monitors

Care and Maintenance of PMC MB1;P

Service and Technical Support

PMC MB1;P Safety Warnings

PMC MB1;P Loudspeaker Warranty

PMC MB1;P Technical Specifications

PMC MB1 Specifications

Audio Specifications

sensitivity	91 dB 1 watt 1 metre
peak SPL at 1 metre	124 dB
frequency response	20 Hz - 25 kHz
impedance	8 ohms
recommended amplifier power	Up to 800 watts

Weight and Dimensions

height	870 mm
width	380 mm
depth	535 mm
weight	49 kg