To Next PageTo Next Page
Need help?Do you have a question about the PNI House H814 and is the answer not in the manual?
General| Video Input | 8 channels |
|---|---|
| Video Output | HDMI, VGA |
| Hard Drive Capacity | Up to 6TB |
| Audio Input | 4 channels |
| Audio Output | 1 channel |
| Video Compression | H.264 |
| Remote Viewing | Yes |
| Motion Detection | Yes |
| Operating System | Embedded Linux |
| Hard Drive Support | 1 SATA HDD |
| Network Interface | RJ45 |
| Mobile App Support | Yes |
Supports 14TB HDD, 10/100Mbps Ethernet, H.265+ compression, and multiple signal formats.
Features P2P service, remote control, human face identification, and motion detection.
Details video/audio specs, resolution, channels, recording modes, and network interface.
Covers PTZ control, USB, HDD, power, temperature, and device dimensions.
Details software for Android and iOS devices, including XMEye application.
Information on software for Windows systems, including General CMS application.
Connect the 4 cameras included in the package.
Connect an audio amplifier.
Connect a monitor (composite video).
Connect a monitor via an HDMI cable (max. 1080P).
Connect a monitor via a VGA cable (max. 1080P).
Connect a microphone to each RCA port.
Instructions for installing the SATA HDD storage unit inside the recording device.
Steps to power on the NVR and initial indicator LED behavior.
Methods for properly shutting down and turning off the device.
Information about the default administrator password and account blocking.
Recommendation to change the default password for enhanced system security.
Guide for configuring the system's time, date, and time zone settings.
Procedure for checking network parameters or manually configuring DHCP.
Steps to add and configure cameras using communication protocols and network search.
Operations for managing camera channels, including deletion.
Configure Encode, Edit devices, Channel title, and Disable IP adaptation.
Perform Bulk upgrade, Network detect, and NVR Network configuration.
Instructions for scanning QR codes to install the XMEye mobile application.
Guidance on activating and configuring the human detection function.
Configuration options for human detection including channel, sensitivity, and period.
How to access the main menu via right-clicking on the preview interface.
Overview of the main menu options available: Record, Alarm, System, Advanced, Info, Logout.
Interface for configuring recording duration, mode, period, and type.
Access to the video playback functionality.
Procedure for backing up recorded data.
Settings for recording length, mode (schedule, manual, stop), and redundancy.
Options for filtering and searching desired registration files by channel, date, or time.
Steps to detect storage and perform data backup using USB or external HDD.
Configures Intelligent Alert, Video Blind, Video Loss, and Abnormality notifications.
Settings for Alarm Input, Alarm Output, Human Detect, and Face Detection.
Settings for sensitivity, period, and behavior for intelligent alerts.
Configure alerts for missing images or video signals, including email and notification.
Configuration for alarm input function when connected to an external alarm system.
Configuration for alarm output function when connected to an external alarm system.
Set system response to storage errors, network issues, or IP conflicts.
Configure human detection, period, and system behavior for alerts.
Configure face detection, period, and system behavior for alerts.
Settings for time zone, date, language, and work session duration.
Technical parameters of connected cameras like resolution and compression.
Manual network parameter configuration or DHCP retrieval.
Settings for time zone, system time, date format, language, and auto logout.
Detailed settings for channel compression, resolution, frame rate, and quality.
Manual network setup including IP, gateway, DNS, and port, or DHCP.
Configuration of network parameters, DHCP, and network encryption.
Settings for alert email addresses and FTP servers for record storage.
Settings for local preview mode: time, channel name, status, resolution.
Settings for channel titles, time display, record status, and resolution.
Configuration for connected PTZ cameras, including protocol and baudrate.
Activate and configure the cyclic display of cameras.
Adding cameras to specific channels and searching for network cameras.
Displays the connection status for all 16 channels.
Shows maximum cameras and resolutions supported by the system.
Details the camera types and resolutions supported: Analog, IP, and Hybrid.
Settings for XVI control, image enhance, and other XVI-related parameters.
Adjustments for XVI control, brightness, contrast, saturation, hue, and acutance.
Configure storage, user accounts, and monitor display parameters.
Settings for auto-maintenance, restoring defaults, and firmware upgrades.
Access device information and manage system settings import/export.
Settings for storage operation modes (read/write, read only) and formatting options.
Managing users, passwords, groups, and setting account security questions.
Adjustments for display settings like top/bottom/left/right deflate and image style.
Settings for image style (standard, bright, soft, beautiful) and volume regulation.
Configure automatic system restarts and automatic deletion of old files.
Options to select and restore specific settings entries to their default values.
Instructions for updating firmware using a USB stick and selecting the update file.
Enabling functions like buzzer, RS232, PTZ, human detection, and debug mode.
Settings for audio channels, alarm channels, remote control type, and enabling features.
Functionality to export or import system configurations and log files.
Accessing information on HDD status, BPS, LOG files, and software version.
Displaying software version and build date information.
Accessing the quick setup guide described at the beginning of the manual.
Accessing the camera addition and configuration interface.
Setting the recording mode for each channel: programmed, manual, or stop recording.
Opens the interface for playing back recorded video footage.
Set IPC parameters and select camera signal types like XVI, AHD, TVI, or Auto.
Configures face detection and alarm output functionality for connected alarm systems.
General image adjustment settings.
Monitoring and diagnosis of connected cameras.
Monitoring, diagnosis, and configuration of network and cloud server.
Monitoring network data traffic performed by the NVR.
Options to log out, shut down, or restart the system.
