To Next PageTo Next Page
Need help?Do you have a question about the PNI House IP716 and is the answer not in the manual?
General| Video Input | 4 channels |
|---|---|
| Video Compression | H.264 |
| Hard Drive Capacity | Up to 6TB |
| Operating System | Embedded Linux |
| Recording Resolution | 720p |
| Hard Drive Support | 1 SATA HDD |
| Audio Output | 1 channel |
| Mobile App | Yes (PNI SmartCam) |
| Network Interface | Ethernet |
| Remote Access | Yes |
Before first use, install the storage unit. Only one SATA HDD with a maximum capacity of 14TB can be installed.
Configure the system's time, date, and time zone settings.
Set network parameters manually or activate DHCP for automatic download.
Scan QR code to install XMEye app and add the system to the application.
Set display options and monitor resolution for the NVR.
Access NetDetect and click Diagnose to test the network configuration.
Access recorded footage for playback and searching.
Configure recording settings like file length, mode, and type.
Configure network parameters like IP address and ports.
Set the system's time zone, date, and time format.
Configure menu language, storage full behavior, session duration, and startup wizard.
Displays technical parameters of connected cameras like resolution and compression.
Manage backup operations to USB or external HDD.
Set cyclic captures and send them via email, FTP, or store on hard disk.
Configure what is displayed in local preview mode: time, status, resolution etc.
Manage users, rights, passwords, and security levels.
Set system behavior for motion detection: registration, notification, and sensitivity levels.
View and set hard drive status (read-only or read-write).
Update the NVR firmware using a USB stick or online.
Schedule system restarts or automatic deletion of old files.
Reset specific setting entries to their default values.
Export or import system configuration settings.
Manage digital channels, channel status, and channel type.
View the history of actions performed in the system.
Display firmware, serial number, and QR codes for the NVR.
Add a camera on a specific channel. Click Add, then Search to find cameras on the same network.
Select protocol, search, add cameras, configure network, and use quick set/bulk modify.
Delete, clear, encode, edit devices, bulk upgrade, and network detect for channels.
Camera connection monitoring and diagnostics.
Monitoring, diagnostics, and configuration of network and Cloud server.
