PNI ML100 User Manual

Descriere:
• Antena CB de putere mare si banda larga pentru masini si camioane
• Este usor de instalat datorita bazei magnetice de 125 mm inclusa
Instalare:
• Trebuie sa conectati antena la baza magnetica din pachet. Aceasta se monteaza de preferinta pe mijlocul cupolei masinii.
• Dupa conectare, blocati antena cu cheia imbus inclusa
• Conectati antena la o statie radio CB si testati SWR-ul intr-o zona deschisa.
• In anumite cazuri, este nevoie sa ridicati sau sa scurtati sarma pentru a obtine o valoare optima a SWR-ului. Pentru
performante maxime se recomanda aceasta procedura, numita calibrare ce trebuie realizata de personal autorizat.
Caracteristici tehnice:
Frecventa
26 – 28 MHz
SWR
≤ 1.2:1
Polaritate
Verticala
Impedanta
50 Ohmi
Putere max. suportata
250 W continuu
500 W pentru scurt timp
Inaltime
100 cm
Baza magnetica
125 mm
Cablu RG58
4 m
Conector
PL259
Description:
• Large CB power antenna and broadband for cars and trucks
• It is easy to install due to the 125 mm magnetic base included
Installation:
• You must connect the antenna to the magnetic base. We recommend you to x the antenna in the center of the car
dome.
• Fix the antenna with the Allen key included
• Connect the antenna to a CB radio and test the SWR in an open area.
• In some cases, you need to raise or shorten the whip of the antenna to obtain an optimal SWR value. For maximum
performance, this procedure is recommended, called calibration, to be performed by authorized personnel.
Technical specications:
Frequency
26 – 28 MHz
SWR
≤ 1.2:1
Polarity
Vertical
impedance
50 Ohmi
Max. supported
250 W continuously
500 W for short time
Height
100 cm
Magnetic base
125 mm
RG58 cable
4 m
Connector
PL259
PNI ML100
Instructiuni de utilizare / User instruction / Felhasználói utasítás
Manuale utente / Instrukcja obsługi / Manual de usuario
RO
EN

PNI ML100 Specifications

General

Brand	PNI
Model	ML100
Category	Antenna
Language	English