R
rgalvanAug 9, 2025
What to do if the POBEL DESA 0081 overheats and activates the safety mechanism?
- BBenjamin HarrellAug 9, 2025
If the POBEL Water System overheats and the safety mechanism is activated, press the RESET button.
To Next PageTo Next PageWhat to do if the POBEL DESA 0081 overheats and activates the safety mechanism?
If the POBEL Water System overheats and the safety mechanism is activated, press the RESET button.
What to do if the POBEL DESA 0081 Water System has adequate water supply but distillation does not happen?
If the POBEL Water System has adequate water supply but distillation does not occur: 1. Check level switch N. If the circuit closes upwards and activates contactor C1, replace the switch if necessary. 2. If there is current supply to the input of contactor C1 but it does not work, replace it. 3. If there is current supply to the resistance (R, R1, R2, R3) but it does not heat, replace the resistance.
Why doesn't the green light turn on in my POBEL Water System?
If the power cord of your POBEL Water System is connected, the electrical switch is ON, but the green light does not turn on, measure and check that the voltage in the network is 230 V (or 110 V for model 10DESA1041, or 380 V for model 10DESA0120). Also, check the status of the switch.
Identifies and illustrates the components and controls on the front panel of the water distiller.
General| Brand | POBEL |
|---|---|
| Model | DESA 0081 |
| Category | Water System |
| Language | English |
