POD POD-X1 - Device Operation Procedures; Charging the POD-X1; Jump Starting Vehicles

2. Connect the 12V 1A input port of POD-X1 to the other end of
the home AC outlet.
2. Connect the 12V 1A input port of POD-X1 to the other end of
the car adaptor.
the POD-X1:
To jump start 12V vehicles
2. Plug the jumper cable’s cord into the jump start socket.
4. Start the vehicle
5. When the vehicle starts, remove jumper cable from vehicle battery
terminals within 30 seconds
6. Leave the vehicle’s engine running
3. Connect the red battery clamp of jumper cable to the vehicle’s
positive (+) battery terminal and connect the black battery clamp
of jumper cable to the vehicle’s negative (-) battery terminal.