Securely fasten the blue plug into the jump start socket when jumpstarting a
vehicle. If not secured, it will not jump start the vehicle, and will even make the
socket melt.
Check that the battery clamps have a good connection, whether the battery
connector is rusted, dirty if the vehicle can not be started. Jump start again after
cleaning. Do not continue to jump start after 3 unsuccessful attempts, otherwise it
will damage the POD-X1. Check the vehicle for other reasons.
Remove the product from the vehicle within 30 seconds of starting the
vehicle.
Do not dispose the product.
use caution when using the POD-X1.
children, elderly, mentally
challenged persons without supervision.
POD-X1 to become wet.
POD-X1 in water.
POD-X1 in an explosive atmosphere, such as in the
the POD-X1. Only a repair technician may
POD-X1 to heat.
90°F.
40°F and 80°F.
POD-X1.
. In case of skin or eye
contact, rinse immediately with clean water and seek medical attention.
Always discard the battery appliances with due care for our environment.
together.
To Next Page
Loading...