4
Pair the Keyboard to your Tablet
1. Slide the OFF/ON switch to ON. The Bluetooth
indicator ( ) lights for 2 seconds, then turns off.
2. Activate your tablet's Bluetooth function (refer to the
user’s guide).
3. Press the keyboard's Connect button. As the
keyboard searches for Bluetooth devices (up to 10
minutes), the Bluetooth indicator fl ashes.
4. When PointMobl Bluetooth 3.0 Keyboard appears
in the Bluetooth devices list, tap it.
5. Your device displays a pairing code. Enter the code
with the keyboard and press Enter/Return. When
the keyboard is paired, the Bluetooth indicator stops
fl ashing.
n Note: If pairing fails, move the keyboard closer to the
tablet, check for interference, and try again.
Change Bluetooth Devices
Your Bluetooth keyboard will automatically remember
the most recently paired device. To use a new device,
you must fi rst disconnect the recently paired device.
To disconnect the paired device, press the keyboard's
Connect button. The keyboard starts searching for
another Bluetooth device.
To Next Page
Loading...