EasyManua.ls Logo

point FS45WN - Preparation and Setup; Pre-use Safety Precautions; Initial Freezer Setup and Cleaning; Transportation and Placement Guide

Default Icon
130 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7
Except the solutions recommended by the manufacturer, do not use
mechanical equipment or other means to accelerate defrosting.
Except the types recommended by the manufacturer, do not use any
electrical appliance inside the food closet.
The freezer is provided with R600a refrigerant and cyclopentane foaming
material and both are combustible materials. Obsolete freezer should be
isolated from fire and combustion treatment is forbidden.
Preparation before using
Warning
Remove all packing materials before using, including the bottom seating
washer, the foam pads and the gummed paper inside.
Use a warm and wet cleaning cloth to wipe the freezer's interior and
exterior (add a little detergent in the warm water and use clean water to
clean up).
Prepare a separating grounding receptacle with both polarities. Do not
share multi- purpose socket with other electrical appliances.
Connect earth wire. Earth electrode of the socket must be equipped with
a reliable grounding wire.
New freezer
Do not invert, traverse, press or shake the freezer. When moving the
freezer, the angle of inclination shall not be larger than 45°.
When moving, do not make excessive pressure to the door or top cover,
otherwise deformation will occur.
Slightly angle the freezer backwards (less than 20°) to move a short
distance.
Transportation and placement of the freezer
Transportation

Related product manuals