3130
Note:
z
When you remove the bucket, do not touch any parts inside of the
appliance. Doing so may damage the appliance.
z
Be sure to push the bucket gently all the way into the unit. Banging the
bucket against anything or failing to push it in securely may cause the
appliance not to operate.
z
If the pump hose drops when you remove the bucket, you must reinstall
the pump hose properly to the appliance before replace the bucket into
the appliance.
z
When you remove the bucket, if there is some water in the appliance you
must dry it.
z
When the appliance is on, if the bucket is removed, the compressor and
the fan turn off, then the appliance will beep 8 times and the digital
display shows Eb.
z
When the appliance is off, if the bucket is removed, the appliance will
beep 8 times and the digital display shows Eb.
2. Continuous draining
z
Water can be automatically emptied into a floor drain by attaching the
appliance with a water hose (Id
≥Φ
5/16", not included) with a female
threaded end (ID:M=1", not included)
Note: On some models, the female threaded end is include.
z
Remove the plastic cover from the back drain outlet of the unit and set
aside, then insert the drain hose through the drain outlet of the appliance
and lead the drain hose to the floor drain or a suitable drainage facility.
Remove the plastic
cover by counter-
clockwise rotation.
Drain hose
Female threaded end
z
When you remove the plastic cover, if there is some water in the back drain
outlet of the appliance you must dry it. Make sure the hose is secure so
there are no leaks and the end of the hose is level or down to let the water
flow smoothly.
z
Direct the hose toward the drain, making sure that there are no kinks that
To Next Page
Loading...