point RS350BS23 - Service and Environment

11
back in the compressor.
•
Adequate air circulation should be around the
appliance, lacking this leads to overheating.
To achieve sufficient ventilation follow the
instructions relevant to installation.
•
Wherever possible the spacers of the product
should be against a wall to avoid touching or
catching warm parts (compressor, condenser) to
prevent possible burn.
•
The appliance must not be located close to
radiators or cookers.
•
Make sure that the mains power plug is
accessible after the installation of the appliance.
Service
•
Any electrical work required to do the servicing
of the appliance should be carried out by a
qualified electrician or competent person.
•
This product must be serviced by an authorized
Service Center, and only genuine spare parts
must be used.
Energy saving
•
Don’t put hot food in the appliance;
•
Don’t pack food close together as this prevents
air circulating;
•
Make sure foods don't touch the back of the
compartment(s);
•
If the electricity goes off, don’t open the door(s);