17
Location
The appliance should be installed well away from sources of heat
such as radiators, boilers, direct sunlight etc. Ensure that air can
circulate freely around the back of the cabinet. To ensure best
performance, if the appliance is positioned below an overhanging
wall unit, the minimum distance between the top of the cabinet
and the wall unit must be at least 100 mm. Ideally, however, the
appliance should not be positioned below overhanging wall units.
Accurate leveling is ensured by one or more adjustable feet at the
base of the cabinet.
This refrigerating appliance is not intended to be used as a built-in
appliance;
Warning!
-
It must be possible to disconnect the appliance from the mains
power supply; the plug must therefore be easily accessible after
installation.
Electrical connection
Before plugging in, ensure that the voltage and frequency shown
on the rating plate correspond to your domestic power supply. The
appliance must be earthed. The power supply cable plug is provided
with a contact for this purpose.
To Next Page
Loading...
