Need help?Do you have a question about the POLAR-AIRE VF-24MC and is the answer not in the manual?
Use fan only in dry environments to prevent electrical hazards.
Avoid touching the fan motor during operation as it gets hot.
Do not use near flammable materials or gases, and keep vents clear.
Do not use with damaged cord or plug; ensure adequate electrical system.
Use the three-prong grounded plug in a properly grounded outlet.
Do not use with any solid-state speed control device.
Operate the fan in an upright position following manual instructions.
Place the fan in the room for proper cooling.
Plug fan directly into a grounded 120V, 60Hz outlet.
Place fan on a stable surface and turn the switch to the desired speed.
Turn the switch to the off position and unplug the fan.
Loosen screw with knob wrench to adjust tilt, then retighten.
Clean grille with a damp cloth; do not immerse fan or wires in water.
Internal motor bearings are permanently lubricated and need no additional service.
Do not operate without the grille in place or if the fan is malfunctioning.
Store fan in original carton, coiling cord to prevent damage.
Replace blown fuse with an identical one; do not defeat safety features.
One-year warranty for defects in material and workmanship from purchase date.
Procedure for returning defective products to the manufacturer for refund.
General| Brand | POLAR-AIRE |
|---|---|
| Model | VF-24MC |
| Category | Fan |
| Language | English |
To Next Page
