This document serves as an instruction manual for Polar Display Chillers, specifically covering models CB507-A, CB509-A, G619-A, G211-A, DP288-A, and DP289-A. These devices are designed for the display and chilling of various products, such as beverages in the G619-A model and other items in the DP289-A model, which appears to be a display cabinet with multiple shelves.
Function Description
The Polar Display Chillers are commercial refrigeration units primarily intended for the attractive display and cooling of food and beverages. They are designed to maintain products at a safe and appropriate temperature for sale and consumption. The units feature transparent doors or panels, allowing customers to view the contents without opening the unit, which helps maintain internal temperatures and conserve energy. The DP289-A model, with its multiple internal shelves, is suitable for showcasing a variety of items, while the G619-A model is specifically designed for bottled or canned beverages.
Important Technical Specifications
The manual provides a table of technical specifications for the various models:
-
G619-A (Display Chiller):
- Voltage: 220-240V, 50Hz
- Power: 180W
- Current: 1.2A
- Temperature Range: 2°C to 12°C
- Capacity: 68 Litres
- Refrigerant: R600a 40g
- Dimensions (H x W x D mm): 885 x 428 x 386
- Weight (Kg): 33.2
-
G211-A (Display Chiller):
- Voltage: 220-240V, 50Hz
- Power: 180W
- Current: 1.2A
- Temperature Range: 2°C to 12°C
- Capacity: 86 Litres
- Refrigerant: R600a 40g
- Dimensions (H x W x D mm): 980 x 425 x 429
- Weight (Kg): 36.5
-
CB507-A (Display Chiller):
- Voltage: 220-240V, 50Hz
- Power: 235W
- Current: 2A
- Temperature Range: 2°C to 12°C
- Capacity: 235 Litres
- Refrigerant: R290 90g
- Dimensions (H x W x D mm): 1690 x 515 x 485
- Weight (Kg): 79
-
CB509-A (Display Chiller):
- Voltage: 220-240V, 50Hz
- Power: 375W
- Current: 2.3A
- Temperature Range: 2°C to 12°C
- Capacity: 235 Litres
- Refrigerant: R290 90g
- Dimensions (H x W x D mm): 1690 x 515 x 485
- Weight (Kg): 79
-
DP288-A (Display Chiller):
- Voltage: 220-240V, 50Hz
- Power: 235W
- Current: 2A
- Temperature Range: 2°C to 12°C
- Capacity: 235 Litres
- Refrigerant: R290 90g
- Dimensions (H x W x D mm): 1690 x 515 x 485
- Weight (Kg): 79
-
DP289-A (Display Chiller):
- Voltage: 220-240V, 50Hz
- Power: 375W
- Current: 2.3A
- Temperature Range: 2°C to 12°C
- Capacity: 235 Litres
- Refrigerant: R290 90g
- Dimensions (H x W x D mm): 1690 x 515 x 485
- Weight (Kg): 79
All models operate within a temperature range of 2°C to 12°C, making them suitable for chilling a variety of products. They are designed for standard 220-240V, 50Hz electrical supplies. The use of refrigerants R600a and R290 indicates a focus on environmentally friendly options.
Usage Features
- Installation:
- The appliance must be positioned on a flat, stable surface.
- It should be moved in an upright position and allowed to stand for approximately 12 hours before operation to allow refrigerant fluids to settle.
- Remove all protective plastic film and coatings.
- Maintain a minimum distance of 20cm (7 inches) between the unit and walls or other objects for ventilation to prevent overheating.
- The unit is supplied with shelves that need to be fitted. To fit shelves, ensure the shelf clips are at the desired height, lower the shelf into position, and ensure it is level. Repeat for remaining shelves.
- Operation:
- Close the doors of the appliance.
- Connect the appliance to a mains power supply.
- Press the power button to turn the light on or off as required.
- Setting Temperature: Press the SET button to display the current temperature. Press the up or down arrow buttons to adjust the desired temperature. Press the SET button again to store the new temperature.
- Storing Food (for CB509-A/DP289-A models):
- Only store foodstuffs in the appliance when it has reached the correct operating temperature.
- Do not place uncovered hot food or liquid inside the appliance.
- Wrap or cover food where possible.
- Do not obstruct the fans inside the appliance.
- Avoid opening the doors for prolonged periods of time.
- Safety Tips:
- A service agent/qualified technician should carry out installation and any repairs if required. Do not remove any components or service panels.
- Consult Local and National Standards for compliance.
- Do not use jet/pressure washers to clean the appliance.
- Do not use the appliance outside.
- Do not use this appliance to store medical supplies.
- Do not use electrical appliances inside the appliance (e.g., heaters, ice cream makers etc.).
- Do not allow oil or fat to come into contact with the plastic components or door seal.
- Do not store products on top of the appliance.
- Bottles containing a high percentage of alcohol must be sealed and placed vertically in the refrigerator.
- Always carry, store, and handle the appliance in a vertical position and move by holding the base of the appliance.
- Always switch off and disconnect the power supply to the unit before cleaning.
- Keep all packaging away from children.
- If the power cord is damaged, it must be replaced by a POLAR agent or a recommended qualified technician.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience or knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
- Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.
- Keep all ventilation openings clear of obstruction. Unit should not be boxed in without adequate ventilation.
- Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.
- Do not damage the refrigerant circuit.
- Do not use electrical appliances inside the food storage compartments of the appliance, unless they are the type recommended by the manufacturer.
Maintenance Features
- Cleaning, Care & Maintenance:
- Switch off and disconnect from the power supply before cleaning.
- Clean the interior of the appliance as often as possible.
- Do not use abrasive cleaning agents. These can leave harmful residues.
- Clean the door seal with water only.
- Always wipe dry after cleaning.
- Do not allow water used in cleaning to run through the drain hole into the evaporation pan.
- Take care when cleaning the rear of the appliance. Sharp edges can cut.
- A POLAR agent or qualified technician must carry out repairs if required.
- Cleaning the Condenser:
- Periodically cleaning the condenser can extend the life of the appliance.
- POLAR recommends that a POLAR agent or qualified technician clean the condenser.
Troubleshooting
The manual includes a comprehensive troubleshooting guide to address common issues:
- Appliance is not working:
- Unit not switched on: Switch on the appliance.
- Plug and lead are damaged: Call POLAR agent or qualified Technician.
- Power supply: Check power supply.
- Internal wiring fault: Call POLAR agent or qualified Technician.
- Appliance runs on, but the temperature is too high/low:
- Too much ice on the evaporator: Defrost the appliance.
- Condenser blocked with dust: Call POLAR agent or qualified Technician.
- Doors are not shut properly: Check doors are shut and seals are not damaged.
- Appliance is located near a heat source or air flow to the condenser is being interrupted: Move the refrigerator to a more suitable location.
- Ambient temperature is too high: Increase ventilation or move appliance to a cooler position.
- Unsuitable foodstuffs are being stored in the appliance: Remove any excessive hot foodstuffs or blockages to the fan.
- Appliance is overloaded: Reduce the amount of food stored in the appliance.
- Appliance is leaking water:
- Appliance is not properly levelled: Adjust the screw feet to level the appliance.
- Discharge outlet is blocked: Clear the discharge outlet.
- Movement of water to the drain is obstructed: Clear the floor of the appliance.
- Water container is damaged: Call POLAR agent or qualified Technician.
- Appliance is unusually loud:
- Loose nut/screw: Check and tighten all nuts and screws.
- Appliance has not been installed in a level or stable position: Check installation position and change if necessary.
Electrical Wiring
The plug is to be connected to a suitable mains socket. Polar appliances are wired as follows:
- Live wire (coloured brown) to terminal marked L.
- Neutral wire (coloured blue) to terminal marked N.
- Earth wire (coloured green/yellow) to terminal marked E.
The appliance must be earthed. If in doubt, consult a qualified electrician. Electrical isolation points must be kept clear of any obstructions. In the event of any emergency disconnection being required, they must be readily accessible.
Compliance
The product must not be disposed of as household waste. To help prevent possible harm to human health and/or the environment, the product must be disposed of in an approved and environmentally safe recycling process. For further information on how to dispose of this product correctly, contact the product supplier, or the local authority responsible for waste disposal in your area. POLAR parts have undergone strict product testing in order to comply with regulatory standards and specifications set by international, independent, and federal authorities. POLAR products have been approved to carry the following symbol: (WEEE symbol).
Need help?
General
To Next Page
