Polar Electro G620-A User Manual (English)

Questions and Answers:

J
Jorge CarlsonAug 1, 2025
What to do if the Polar Electro G620-A Ice Maker is not working?
- L
  Laura MeltonAug 1, 2025
  If your Polar Electro Ice Maker isn't working, there are several things to check: * Ensure the appliance is correctly plugged in and switched on. * Check the fuse in the plug and replace it if it has blown. * Verify the power supply is working. If these steps don't resolve the issue, it could be due to damaged plug and lead or an internal wiring fault, in which case you should call a POLAR agent or qualified technician.
T
Tammy JohnsonAug 5, 2025
Why is the Water indicator lit on my Polar Electro G620-A?
- D
  David ScottAug 6, 2025
  The water indicator light on your Polar Electro Ice Maker illuminates when the water level is low or the tank is empty. Refill the water tank to resolve this. It can also mean that the water filter is blocked, so you should clean the water filter and restart the appliance.
T
Tracey ThompsonAug 9, 2025
What to do if Water and Ice Full indicators flash together on Polar Electro G620-A?
- K
  Kelsey JacksonAug 9, 2025
  If the Water and Ice Full indicators are flashing together on your Polar Electro Ice Maker, it indicates that the water box is blocked and cannot tilt. To fix this, disconnect the appliance from the power supply, remove some of the ice cubes, and gently tilt the water box by hand. After doing this, restart the appliance after 3 minutes.
F
frobinsonAug 14, 2025
What to do if the Ice Full indicator is lit on my Polar Electro Ice Maker?
- H
  Holly SimsAug 14, 2025
  If the Ice Full indicator is lit on your Polar Electro Ice Maker, it means that either the ice basket is full, so you should empty it, or the room temperature is too low. If it is too low, move the appliance to a warmer position.