Polar Electro GK031-A

Questions and Answers

D
deankarenAug 2, 2025
Why is the RUN light off on my Polar Electro Ice Maker?
- I
  Ian GarciaAug 2, 2025
  If the RUN light is off on your Polar Electro Ice Maker, there are several potential causes: * The unit might not be switched on. Ensure it is correctly plugged in and switched on. * There could be a power supply issue. Check the power supply. * The ambient temperature may be too low. Move the appliance to a warmer location if the temperature is below 10°C. * There might be an issue with the water supply. Verify that the water supply is on and that the supply hoses are not blocked. * Power fluctuations might be occurring. Try turning off the ice maker and restarting it after 3 minutes. * In case of a damaged plug or lead or a refrigerant leak, it is recommended to call a POLAR agent or a qualified technician.
J
Jennifer ArellanoAug 6, 2025
What to do if the 'Water low light' is on on my Polar Electro Ice Maker?
- W
  Walter MarshallAug 6, 2025
  If the 'Water low light' is on for your Polar Electro Ice Maker, it could be due to the following reasons: * The ice maker might not be connected to a water supply. Connect the ice maker to a water supply. * The water filter could be blocked. Clean the water filter and restart the ice maker. * The water pressure may be too low. The water pressure should be between 100kPa - 400kPa (14.5-58psi). It is recommended to call a plumber to check the water supply.
S
Stephanie DrakeAug 10, 2025
How to fix Ice Full light on Polar Electro GK031-A?
- B
  Beverly ZimmermanAug 11, 2025
  If the Ice Full light is on your Polar Electro Ice Maker, it indicates that: * The ice bin is full. Empty the ice bin. * The room temperature is too high. Relocate the appliance to a cooler environment.
L
Lance GarciaAug 14, 2025
What to do if the Fault light is on on my Polar Electro GK031-A Ice Maker?
- J
  James HallAug 15, 2025
  If the Fault light is on in your Polar Electro Ice Maker, it might be due to a blocked low water box or a motor system fault. Disconnect the ice maker from the power supply, remove some ice cubes, and gently tilt the water box. Restart the ice maker after 3 minutes. If the problem continues, it is recommended to call POLAR.
M
Matthew JacksonAug 25, 2025
What does it mean when the fault light flashes twice every 6s on my Polar Electro GK031-A?
- T
  Tara WallerAug 25, 2025
  If the fault light flashes twice every 6 seconds when your Polar Electro Ice Maker is on, it indicates a fault with the ambient temperature sensor, preventing ice production. Check if the ambient temperature sensor is connected properly. If it appears normal, it is recommended to call a POLAR agent or a qualified technician.
F
Francisco DelgadoAug 27, 2025
What does it mean when the fault light flashes thrice every 6s on my Polar Electro GK031-A?
- H
  Haley WilliamsAug 27, 2025
  If the fault light flashes three times every 6 seconds when your Polar Electro Ice Maker is on, this indicates a water temperature sensor fault, which prevents ice production. Check if the water temperature sensor is connected properly. If the connection is normal, it is recommended to contact a POLAR agent or a qualified technician.
T
tonya48Sep 10, 2025
What does it mean when the fault light flashes once every 6s on my Polar Electro GK031-A Ice Maker?
- C
  Courtney SimmonsSep 12, 2025
  If the fault light flashes once every 6 seconds when your Polar Electro Ice Maker is on, it indicates an ice sensor fault, preventing ice production. Check if the ice sensor is properly connected. If it appears normal, it is recommended to call a POLAR agent or a qualified technician.