Polar Electro Loop 2 - Initiating and Monitoring Training

25
Now your current heart rate and EnergyPointer are added to the display rotation.
If PAIRED doesn't appear on the display, repeat steps 2-3, and make sure none of your clothing is there
between Polar Loop 2 and the heart rate sensor.
If you have problems with pairing, visit polar.com/support/Loop2 for further instructions.
Start the Training
Note that Polar Loop 2 can't record heart rate in water. That is because the Bluetooth Smart® transmission
doesn't work in water.
To start a heart rate training session, wear your heart rate sensor and Polar Loop 2. Tap the touch button and
wait until the LED display turns off. Then wait a couple of seconds until your heart rate appears on the display.
You can't start a heart rate training session when Polar Loop 2 is syncing data with the Polar Flow mobile
app. Wait until the syncing sign disappears before starting a training session.