EasyManuals Logo
Home>Polaris>Boat>2003 Virage i

Polaris 2003 Virage i User Manual

Polaris 2003 Virage i
114 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #52 background imageLoading...
Page #52 background image
50
OPERATION
Pre-Operation Inspection
Battery
Confirm that the battery terminal connections
are tight, and make sure the battery is
securely fastened in its mounting position.
Inspect the battery for leaks, and check the
vent hose for kinks or blockage.
Check the battery fluid level and add only
distilled water if the level is low. Tap water
contains minerals that are harmful to a battery.
Maintain the fluid level between the upper and lower marks (1) on the
battery.
Keep the battery in good condition and fully charged at all times, as a
weak battery can leave you stranded. Never operate the watercraft with
a battery that’s too weak to start t he engine on its own or shows signs
of loss of power.
Causing sparks while servicing the battery or servicing the battery
when gas fumes are present can result in an explosion, causing
serious injury or death.
Never create a spark while servicing the battery. If you smell fuel in
the craft, do not service the battery. Take the watercraft to your
dealer immediately for inspection.
WARNING
1

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Polaris 2003 Virage i and is the answer not in the manual?

Polaris 2003 Virage i Specifications

General IconGeneral
BrandPolaris
Model2003 Virage i
CategoryBoat
LanguageEnglish

Related product manuals