112
MAINTENANCE
Suspension Settings
Front/Rear Shock Compression
The compression damping clicker knob is located on top of the shock
reservoir. When the knob is turned clockwise until it stops, the damping
is in the fully closed position.
1. Turn the clicker clockwise to increase compression damping.
2. Turn the clicker counter-clockwise to decrease compression damp-
ing.
FOX Shocks Walker Evans Shocks
Setting Compression Damping Setting Compression Damping
Softest 20 clicks from closed Softest 16 clicks from closed
Factory 10 clicks from closed Factory Front: 6 clicks from closed
Rear: 7 clicks from closed
Firmest 2 clicks from closed Firmest 1 click from closed
HARD SOFT
To Next Page
Loading...
Need help?
General
