Polaris 2015 800 PRO RMK User Manual

31
FEATURES
Fuel Type Selection
Whenever using ethanol, MTBE or other forms of oxygenated gasoline,
the fuel type designation setting must be changed to “Eth” in the gauge.
When using the recommended 91 non-ethanol gasoline, always select
the “91-non” setting.
Whenever in doubt of your fuel
purchase, use the “Eth” setting as
a safeguard.
Use the following procedure to
change the fuel type designation in
the gauge. Refer to the fuel type
selection label located inside the
left side panel.
1. Start the engine.
2. Lock the parking brake.
3. Press and release the
SELECT button or SET
switch until “FUEL” is
displayed in the lower section
of the gauge.
4. Press and hold the SELECT button or SET switch until the desired
fuel type is displayed in the center of the screen.

Polaris 2015 800 PRO RMK Specifications

General

Engine Type	Liberty
Displacement	795 cc
Bore x Stroke	85 mm x 70 mm
Fuel System	Cleanfire Injection
Cooling	Liquid
Electric Start	Optional
Reverse	PERC
Track Width	15 in
Track Length	155 in
Fuel Capacity	11.5 gal. (43.5 L)
Fuel Delivery	Electronic Fuel Injection
Brake	RMK Hydraulic