EasyManuals Logo

Polaris 2015 800 PRO RMK User Manual

Polaris 2015 800 PRO RMK
140 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #61 background imageLoading...
Page #61 background image
59
PRE-RIDE INSPECTIONS
Before Starting the Engine
Brakes
Always check the following items for proper operation before starting
the engine.
Brake Lever Travel
Squeeze the brake lever. It
should move no closer to the
handgrip than 1/2 inch (1.3
cm). A smaller distance
indicates low brake fluid
level or air in the hydraulic
system. Refer to the brake
bleeding information on page
96 or see your dealer for
service.
Lever Feel
If the brake lever feels “spongy” when squeezed, check the brake fluid
level and condition. Add fluid as needed. See page 95.
WARNING! Continued use of “spongy” brakes may cause a complete loss of
brakes, which could result in serious injury or death. Always have the brakes
serviced at the first sign of sponginess.
1/2 in. (1.3 cm)

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Polaris 2015 800 PRO RMK and is the answer not in the manual?

Polaris 2015 800 PRO RMK Specifications

General IconGeneral
Engine TypeLiberty
Displacement795 cc
Bore x Stroke85 mm x 70 mm
Fuel SystemCleanfire Injection
CoolingLiquid
Electric StartOptional
ReversePERC
Track Width15 in
Track Length155 in
Fuel Capacity11.5 gal. (43.5 L)
Fuel DeliveryElectronic Fuel Injection
BrakeRMK Hydraulic

Related product manuals