6
ADJUSTING VOLUME LEVEL
To adjust the volume level:
MUTING OUTPUT
To mute and unmute the volume:
Turn Rotary
Knob
Turn Rotary Knob
to adjust.
The Volume
screen is
displayed
Press Menu to exit.
See “Menu Key
Operation” on page 5.
Mute
• Press the Mute key
to mute the audio
output. The Mute icon is displayed over the
top of the current input source screen.
• Press the Mute key
again
to unmute the audio
output. The volume returns to the
previously set level.
11
LISTENING TO AUXILIARY INPUT
The overhead unit can accept audio from devices with an audio output .
To listen to input from an auxiliary device:
Press the Input source key ( ) until the AUX input source screen is displayed.
Continuing to press the key will display the input source screens for AM, FM and Bluetooth
as described in the section “Input Source Screens” .
AUXILIARY SOURCE SCREEN
The input source screen is displayed when you select auxiliary input, shown in Figure 4 below.
Figure 4 – Example of auxiliary input source screen
AUXILIARY INPUT
20
To Next Page
Loading...
Need help?
General