92
MAINTENANCE
Cooling System (WideTrak)
The cooling system on liquid cooled models consists of the following
major components:
• Coolant bottle
• Water pump
• Cylinders
•Heads
• Inlet and outlet manifolds
• Pressure cap
• Heat exchangers
Coolant
The coolant supplied in the system at the factory is a 50/50 mixture of
ethylene-glycol and distilled water, which will provide adequate freeze
protection under most conditions. If the vehicle will be stored or oper-
ated at extremely low temperatures, greater protection may be required.
Please see your Polaris dealer.
When adding or changing coolant, Polaris recommends using Premium
60/40 anti-freeze coolant, which is already premixed and ready to use.
Do not dilute with water. Never exceed a 60% antifreeze/40% water
mixture. See page 128 for the part numbers of Polaris products.
NOTE: Never add tap water to the cooling system. Minerals cause
deposits and may react adversely with the metals in the engine
and cooling system.
To Next Page
Loading...
Need help?
General
