104
TROUBLESHOOTING
Rear Suspension Troubleshooting
Problem Solution
Rear suspension
bottoms too easily
• Refer to the suspension adjustment and set-up information
beginning on page 36.
Rides too stiff in rear • Refer to the suspension adjustment and set-up information
beginning on page 36.
• Check for binding suspension shafts and grease all pivot
points.
Machine darts from
side to side
• See your dealer for ski alignment inspection.
• Make sure spindles and all steering components turn freely.
• Check for excessive play in steering assembly (see your
dealer).
• Ensure skags are straight on skis.
• Check rail slide/replace if worn (see page 91).
Front end pushes • Check for worn skags.
• Check for binding front suspension shafts and steering
components, grease all pivot points (elevate front of
machine).
• Increase IFS preload (if equipped) (see page 35).
Steering is heavy • Make sure spindles and all steering components turn freely.
• See your dealer for ski alignment inspection.
• Check skags and skis for damage.
To Next Page
Loading...
