Do you have a question about the Polaris Sportsman 500 and is the answer not in the manual?
Brand | Polaris |
---|---|
Model | Sportsman 500 |
Category | Offroad Vehicle |
Language | English |
Procedures for identifying vehicle models and engine designations.
Detailed measurements and specifications for vehicle dimensions.
General torque values for fasteners used in various assemblies.
Definitions of technical terms and abbreviations used in the manual.
Schedule of routine inspections, adjustments, and lubrication intervals for vehicle components.
Essential checks to perform before operating the vehicle for safety and performance.
Guide to recommended lubricants, fluids, and their capacities for the vehicle.
Procedure for checking and maintaining the correct engine oil level.
Steps for performing engine oil and filter replacement service.
Procedure for inspecting and adjusting engine valve clearance.
Torque values for engine fasteners and components.
Technical specifications and tolerances for engine components.
Step-by-step instructions for removing the engine from the vehicle frame.
Procedures for removing and inspecting cylinder and piston components.
Steps for disassembling the engine crankshaft and related components.
Procedures for disassembling the starter motor for inspection or service.
Guidelines for adjusting carburetor jetting based on altitude and temperature.
Step-by-step instructions for disassembling the Mikuni CV carburetor.
Procedures for cleaning carburetor components and passages.
Steps for reassembling the Mikuni CV carburetor after cleaning or service.
Procedure for adjusting the float height in the carburetor for proper fuel level.
Common fuel system and carburetor issues and their solutions.
Torque values and specialized tools required for body and steering work.
Exploded diagram of the steering system components and their assembly.
Instructions for removing and replacing the A-arm assembly.
Procedure for replacing the front strut cartridge in the suspension system.
Steps for removing and installing ball joints in the steering and suspension.
Explanation of how the Polaris Variable Transmission (PVT) system functions.
Routine inspection and maintenance tasks for the PVT system.
Step-by-step guide for reassembling the drive clutch.
Procedures for removing, inspecting, and measuring the drive belt.
Steps for disassembling and inspecting the driven clutch components.
Explanation of the Engine Braking System (EBS) functionality.
Common PVT system issues and their remedies.
Torque values for final drive components and fasteners.
Explanation of the All Wheel Drive system operation and engagement.
Procedure for adjusting front hub wheel bearings for proper operation.
Steps for removing the front drive axle assembly.
Instructions for replacing the CV joint boot on the front drive shaft.
Procedure for removing the rear hub and bearing carrier.
Torque values for transmission case bolts and mounting hardware.
Step-by-step instructions for removing the transmission from the vehicle frame.
Procedures for installing the transmission into the vehicle frame.
Detailed steps for disassembling the transmission unit.
Instructions for reassembling the transmission unit.
Common shifting issues and diagnostic steps for the transmission.
Brake system specifications, tolerances, and torque values.
Explanation of how the hydraulic brake system components function.
Steps for changing brake fluid and bleeding the hydraulic system.
Procedures for assembling the brake master cylinder components.
Steps for installing new front brake pads and adjusting the caliper.
Procedures for assembling the front brake caliper components.
Common brake system problems and diagnostic solutions.
Important notes and guidelines for performing electrical system diagnosis.
Procedures for testing the vehicle's ignition system components.
Steps for proper battery care, charging, and storage.
Procedures for testing the vehicle's charging system for proper function.
Diagnostic steps for common starter system issues.
Troubleshooting guides for the electronic speedometer and related sensors.
Testing procedure for the coolant temperature sensor and hot light circuit.