PERIODIC MAINTENANCE INTERVAL TABLE
The following chart is a guide based on average riding conditions. You may need
to increase frequency based on riding conditions. When inspection reveals the
need for replacement parts, always use genuine POLARIS parts, available from
your POLARIS dealer.
I - INSPECT (CLEAN, ADJUST, TIGHTEN, LUBRICATE, REPLACE IF NECESSARY)
C - CLEAN, R - REPLACE, L - LUBRICATE
ITEM
FREQUENCY
150 MI.
(240 KM)
500 MI.
(800 KM)
1000 MI. (1600
KM)
2000 MI. (3200
KM)
PRE- SEASON
CLUTCH
Drive Belt Condition
(See page 88)
I I I I
Clutches
C C C
Belt Tension
I I I I
Clutch Sheaves
I I I I
ENGINE/COOLING
Engine Mounts
I I I I
Engine Torque Stop (See page 88)
I I I I
Recoil Rope
I I I I
Cylinder Head Bolts
I I I
Cylinder Base Nuts
I I I
Ignition Timing BTDC
I I I
Spark Plugs
(See page 78)
I I R I
Exhaust Pipe
(See page 81)
I I
Exhaust Retaining Springs
(See page 81)
I I I
I
69
MAINTENANCE
Downloaded from ManualsNet.com search engine