EasyManuals Logo

Polaris 550 IQ Shift User Manual

Polaris 550 IQ Shift
124 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #101 background imageLoading...
Page #101 background image
97
MAINTENANCE
Extended Storage
Electrical Connections
Replace worn or frayed electrical wire and connectors. Be sure wiring
harness is properly secured away from sharp edges, steering linkage,
moving parts, and hot exhaust parts.
Track and Suspension
Moderate track tension should be maintained during summer storage.
The machine should be supported off the ground to allow the track to
hang freely.
Transporting the Snowmobile
Whenever the snowmobile is transported:
1. Turn the fuel valve off. See page 27.
2. Be sure the fuel cap and oil cap are installed correctly.
3. Always tie the snowmobile to the transporting unit securely using
suitable straps.
4. Remove the ignition key to prevent loss.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Polaris 550 IQ Shift and is the answer not in the manual?

Polaris 550 IQ Shift Specifications

General IconGeneral
Displacement544 cc
Front SuspensionIQ
Rear SuspensionIQ
Cylinders2
CoolingLiquid
Track Length121 in
Track Width15 in
Front Travel9 in (22.9 cm)
Rear Travel13.9 in
Ski TypeGripper
Ski Stance42.5 in (108 cm)

Related product manuals