EasyManuals Logo

Polaris 550 IQ Shift User Manual

Polaris 550 IQ Shift
124 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #71 background imageLoading...
Page #71 background image
67
MAINTENANCE
Lubrication
Driveshaft Bearing
Inject grease into the fitting on the
speedometer sensor housing until
grease purges from the seal on the
inside of the tunnel. This should
take approximately two pumps. Do
not use more than four pumps.
Throttle Cable
Lubricate the throttle cable lightly
with grease or oil. With the engine
off, turn the handlebars to the left
and lubricate liberally as shown.
Choke and Choke Cable
Lubricate the choke slide and cables
lightly with oil or grease. Before
turning the engine off, operate the
choke intermittently to draw mois-
ture out of the choke plunger area
and reduce the possibility of the
choke becoming frozen.
H
H
H

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Polaris 550 IQ Shift and is the answer not in the manual?

Polaris 550 IQ Shift Specifications

General IconGeneral
Displacement544 cc
Front SuspensionIQ
Rear SuspensionIQ
Cylinders2
CoolingLiquid
Track Length121 in
Track Width15 in
Front Travel9 in (22.9 cm)
Rear Travel13.9 in
Ski TypeGripper
Ski Stance42.5 in (108 cm)

Related product manuals