Polaris 600 INDY 2013 User Manual

102
MAINTENANCE
Steering System
Ski Alignment
WARNING! Improper ski alignment or adjustment may cause loss of steering
control, resulting in serious injury or death. Do not attempt to change the ski
alignment or camber adjustment. See your POLARIS dealer.
1. Place the handlebars in a straight-ahead position.
2. With only vehicle weight compressing the suspension, measure
10 inches (25.4 cm) forward from the center of the ski mounting
bolt. See illustration. At this point, measure between the skis. This is
measurement X.
3. Perform the same measurement rearward from the center of the ski
mounting bolt. This is measurement Y.
4. The X measurement should be 1/8-1/4 inch (3-6 mm) greater than
the Y measurement. If the skis are misaligned, see your dealer for
alignment correction as camber adjustment may also be affected.
X
Y
10 in.
(25.4 cm)
10 in.
(25.4 cm)

Polaris 600 INDY 2013 Specifications

General

Displacement	599 cc
Bore x Stroke	77.25 mm x 64 mm
Front Suspension	PRO-RIDE
Track Width	15 inches
Track Length	121 inches
Cooling System	Liquid
Starter	Electric
Suspension Front	PRO-RIDE
Brake Type	Hydraulic Disc
Length	114 inches
Width	48 inches
Track Height	1.25 inches
Carburetion	Dual VM34 Mikuni carburetors
Height	46 in. (116.8 cm)