Name: Polaris 600 INDY 2013
Brand: Polaris
Rating: 4 (1 reviews)

To Next Page

To Previous Page

110

TROUBLESHOOTING

Engine Troubleshooting

Problem Probable Cause Solution

Noise in drive

system

Broken drive clutch

components

• SEE YOUR DEALER.

Bearing failure/

chaincase, jackshaft,

or front drive shaft

• SEE YOUR DEALER.

Drive belt surface

flat spots

• Inspect and replace as needed.

Drive chain loose • Inspect and adjust (or replace).

Drive chain worn,

sprocket teeth bro-

ken

• SEE YOUR DEALER.

Poor low RPM

performance

Worn drive belt • Inspect and replace as needed.

Excessive belt/

sheave clearance

• SEE YOUR DEALER.

Sticky clutch • SEE YOUR DEALER.

Poor fuel quality • Use 87-91 octane fuel (or higher).

Engine doesn't turn Seized engine • SEE YOUR DEALER. Seizure is a

result of poor lubrication, inade-

quate fuel supply, broken parts or

improper cooling.

Hydrostatic lock • Fuel may have entered the crankcase

while the vehicle was standing or

being transported. SEE YOUR

DEALER to correct the cause. Drain

plug(s) are located on the lower

crankcase for emergency draining.

Questions and Answers:

Need help?

Do you have a question about the Polaris 600 INDY 2013 and is the answer not in the manual?

Polaris 600 INDY 2013 Specifications

General