Polaris 600 INDY 2013 User Manual

29
FEATURES
Fuel Type Selection
Whenever using ethanol, MTBE or other forms of oxygenated gaso-
lines, the fuel type designation setting must be changed to “ETH” in the
gauge. When using the recommended 91 non-ethanol gasoline, always
select the “91-NON” setting.
Whenever in doubt of your fuel
purchase, use the “ETH” setting
as a safeguard.
Use the following procedure to
change the fuel type designation in
the gauge. Refer to the fuel type
selection label located inside the
left side panel.
1. Start the engine.
2. Lock the parking brake.
3. Press and release the MODE
button until “FUEL” is
displayed in the lower section
of the gauge.
4. Press and hold the SET
switch on the left handlebar
until the desired fuel type is
displayed in the center of the
screen.
MPH KM H
EF
MODE
30
20
12 0
14 0
16 0
10
40
50
60
70
80
90
10 0
0
MPH KM H
EF
MODE
30
20
12 0
14 0
16 0
10
40
50
60
70
80
90
10 0
0

Polaris 600 INDY 2013 Specifications

General

Displacement	599 cc
Bore x Stroke	77.25 mm x 64 mm
Front Suspension	PRO-RIDE
Track Width	15 inches
Track Length	121 inches
Cooling System	Liquid
Starter	Electric
Suspension Front	PRO-RIDE
Brake Type	Hydraulic Disc
Length	114 inches
Width	48 inches
Track Height	1.25 inches
Carburetion	Dual VM34 Mikuni carburetors
Height	46 in. (116.8 cm)