Polaris 600 INDY 2013 User Manual

76
MAINTENANCE
Periodic Maintenance Interval Table
The following chart is a guide based on average riding conditions. You
may need to increase frequency based on riding conditions. When
inspection reveals the need for replacement parts, always use genuine
POLARIS parts, available from your POLARIS dealer.
I - Inspect (clean, adjust, tighten, lubricate, replace if necessary)
C - Clean R - Replace L - Lubricate
Item See
Page
Frequency
150 mi.
(240 km)
500 mi.
(800 km)
1000 mi.
(1600 km)
2000 mi.
(3200 km)
Pre-
Season
CLUTCH
Clutch Alignment Offset
(without belt)
94 II I
Drive Belt Condition 95 II II
Clutches 94 CC C
Belt Tension -- II II
Clutch Sheaves 94 II II
ENGINE/COOLING
Engine Mounts -- II II
Recoil Rope -- II II
Cylinder Head Bolts -- II I
Cylinder Base Nuts -- II I
Ignition Timing BTDC -- II I
VES System -- CC C I
Coolant Level 85 IIRI
Coolant Hose -- II II
Coolant Circulation -- II I
Coolant Leaks -- II II
Spark Plugs 83 IIRI
Exhaust Pipe 88 II
Exhaust Retaining
Springs
88 II II

Polaris 600 INDY 2013 Specifications

General

Displacement	599 cc
Bore x Stroke	77.25 mm x 64 mm
Front Suspension	PRO-RIDE
Track Width	15 inches
Track Length	121 inches
Cooling System	Liquid
Starter	Electric
Suspension Front	PRO-RIDE
Brake Type	Hydraulic Disc
Length	114 inches
Width	48 inches
Track Height	1.25 inches
Carburetion	Dual VM34 Mikuni carburetors
Height	46 in. (116.8 cm)