3.36
9850064 R03 - 2021 650 / 850 Matryx Trail Performance / Crossover Snowmobile Service Manual
© Copyright Polaris Inc.
36.Disconnect the water temp sensor
3$
and DET sensor
3%
from the wiring harness.
NOTICE
Remove any cable ties but note locations for
installation.
37.Remove the stator connector
3^
from the wiring
harness.
38.Remove the cable ties
3&
from the wire supports.
NOTICE
Do not remove the cable tie securing the support to the
coolant hose.
39.Remove the fuel injector harness
3*
and oil pump
connector
3(
from the wiring harness. Remove the
connectors from the connector placement bracket.
NOTICE
Do not attempt to disconnect the fuel injectors from the
sub harness.
ENGINE / COOLING / EXHAUST
To Next Page
Loading...
