9850064 R03 - 2021 650 / 850 Matryx Trail Performance / Crossover Snowmobile Service Manual
© Copyright Polaris Inc.
1.71
ECU INFORMATION:
The drop-down menu
q
will display what information is
shown. Click to select “Engine Controller”.
Item
w
is the model number of the vehicle the ECU is
installed on. This is the information transferred from the
ECU when a service replacement ECU is installed.
Item
e
is the vehicle serial number.
Item
r
is the Polaris part number of the ECU and should
match the number in the vehicle’s parts catalog.
Item
t
is the ECU calibration software part number. This
number must match the number provided by Digital
Wrench when performing the ECU Reflash procedure
and referenced if new ECU calibration files are released.
INSTRUMENT CLUSTER INFORMATION:
The drop-down menu
q
will display what information is
shown. Click to select ““Instrument Cluster”.
Item
w
is the serial number for the instrument cluster.
When the cluster is an PIDD, this is the number used
when registering the cluster with Ride Command.
Item
e
is the software program version number.
GENERAL INFORMATION
1
To Next Page
Loading...
Need help?
General
