Polaris 800 RMK 2011 User Manual

49
PRE-RIDE INSPECTIONS
Pre-Ride Suspension Inspection
Loose nuts and bolts can reduce your snowmobile's reliability and cause
needless repairs and down time. Before beginning any snowmobile trip,
a visual inspection will uncover potential problems. Check the follow-
ing items on a weekly basis or before any long trip.
Item See Page
Check suspension mounting bolts for tightness. --
Check rear idler wheel bolts for tightness. 97
Check rear idler adjusting bolt locknuts for tightness. --
Check front torque arm limiter strap condition. --
Check rail slide condition. 101
Check track tension. 96
Check ski runner/skag condition. 101
Check ski spindle bolts for tightness. --
Check tie rod end nuts for tightness. --

Polaris 800 RMK 2011 Specifications

General

Engine Type	Liberty
Displacement	795 cc
Track Length	155 in
Track Width	15 in
Track Height	2.4 in
Fuel Capacity	11.5 gal
Bore x Stroke	85 mm x 70 mm
Starter	Electric
Drive Clutch	P-85
Driven Clutch	Team LWT
Height	48 in
Front Travel	9 in
Rear Travel	16 in
Ski Type	Gripper
Carburetion	Mikuni